Press Sample
Hey guys! Today I have the November Fandom Flakies Box to share with you. This box consist of three polishes. The polishes are made by Bee's Knees Lacquer, Night Owl Lacquer and a guest maker each month. The guest maker this month is Supernatural Lacquer and their fandom theme is The Addams Family. Read on for more info!
Bee's Knees Lacquer-Don't Torture Yourself, That's My Job
Described as a greige nude full of red to orange to gold UCC flakes.
Shown here in 3 coats, plus top coat. Formula was good and applied well. Dries with some texture so a top coat is needed for a full, glossy finish.
Night Owl Lacquer-Cara Mia. Mon Cher.
Described as a black with purple/red/gold crystal chameleon flakes and bright silver flakes.
Shown here in 2 coats, plus top coat. Formula was good and applied well. Dries with some texture so a top coat is needed for a full, glossy finish.
Supernatural Lacquer-The Mamushka
Described as a plummy purple base with magenta to gold multichrome shimmer, orange to green colorshift flakies, translucent white flakies and black microglitters.
Shown here in 2 coats, plus top coat. Formula was good and applied well. Dries with some texture so a top coat is needed for a full, glossy finish.
Ribbits and Stickits-Waterslide Decals
Instructions:
1. Paint nails, let dry completely.
2. Cut out the desired image.(Try cutting as close as possible to the image)
3. Place in warm water for 5-10 seconds.
4. Using your thumb & index finger slide the paper backing from the image.
5. Lightly dampen the back of the decal.
6. Place image on your nail, pressing down to remove any air bubbles.
7. Seal it with a top coat.
Tip:
If you prefer to use the decal over a colored/darker polish it's best to paint the back of the image with white polish/acrylic paint letting it dry before applying it to the nail. (which is what I did for my mani)
Ribbits and Stickits-Vinyl Stickers
Instructions:
1. Scrape over the entire image going over it several times(use a credit card or something with a thin hard edge) This will help the vinyl stick to the transfer sheet.
2. Place the decal face down & slowly peel the white backing from the translucent transfer sheet.
3. Slowly remove transfer sheet, making sure all of the pieces of the vinyl are sticking to the transfer tape.
4. Clean the surface where you are applying your sticker.
5. Add your sticker to the surface, smooth down.
6. Take your scraper & scrape all over the image(use your fingers if scraping isn't an option)
7. Slowly & carefully remove the transfer sheet leaving your sticker decal in place.
Available November Nov 13th at noon EDT
and ends 11/20th at 11:59pm EDT
$30+shipping
Ribbits and Stickits Goodies:
Waterslide decals-$8
Holo stickers-$5
CONVERSATION