Hey guys! Today I have April's Fandom Flakies Box to share with you. This box consist of three polishes. The polishes are made by Bee's Knees Lacquer, Night Owl Lacquer and a guest maker each month. The guest maker this month is Nvr Enuff Polish and their fandom theme for this month is "Boy Bands". Read on for more info!
Inspired by NSYNC. Described as a cornflower blue polish with red to orange to green UCC flakes and orange to green iridescent flakes.
Shown here in 3 coats, plus top coat.
Formula was good and applied well.
Dries with some texture.
Top coat needed for a full, glossy finish.
Night Owl Lacquer-Hangin' Tough
Inspired by the New Kids on the Block. Described as a white crelly with holographic flecks, black shreds and lots of color shifting crystal chameleon flakes.
Shown here in 3 coats, plus top coat.
Formula was good and applied well.
Dries with some texture.
Top coat needed for a full, glossy finish.
Nvr Enuff Polish-I've Gotta Question For Ya
Inspired by the Backstreet Boys. Described as a light silvery/blue linear holo with a purple shift and large silver flakes.
Shown here in 2 coats, plus top coat.
Formula was good and applied well.
Dries with subtle texture.
Top coat needed for a full, glossy finish.
Instructions:
1. Paint nails, let dry completely.
2. Cut out the desired image.(Try cutting as close as possible to the image)
3. Place in warm water for 5-10 seconds.
4. Using your thumb & index finger slide the paper backing from the image.
5. Lightly dampen the back of the decal.
6. Place image on your nail, pressing down to remove any air bubbles.
7. Seal it with a top coat.
Tip:
If you prefer to use the decal over a colored/darker polish it's best to paint the back of the image with white polish/acrylic paint letting it dry before applying it to the nail.
Ribbits and Stickits-Vinyl Stickers
Instructions:
1. Scrape over the entire image going over it several times(use a credit card or something with a thin hard edge) This will help the vinyl stick to the transfer sheet.
2. Place the decal face down & slowly peel the white backing from the translucent transfer sheet.
3. Slowly remove transfer sheet, making sure all of the pieces of the vinyl are sticking to the transfer tape.
4. Clean the surface where you are applying your sticker.
5. Add your sticker to the surface, smooth down.
6. Take your scraper & scrape all over the image(use your fingers if scraping isn't an option)
7. Slowly & carefully remove the transfer sheet leaving your sticker decal in place.
Available April 10th at noon EDT
and ends 4/17 at 11:59pm EDT
Ribbits and Stickits add on items:
Holo Sticker $6
Waterslide Decals $10
SHOP||FACEBOOK||INSTAGRAM
CONVERSATION