Hey guys! Today I have March's Fandom Flakies Box to share with you. This box consist of three polishes. The polishes are made by Bee's Knees Lacquer, Night Owl Lacquer and a guest maker each month. The guest maker this month is Heather's Hues and their fandom theme for this month is "Adventure Time". Read on for more info!
Bee's Knees Lacquer-The Vampire Queen
Inspired by Marceline. Described as a grayed out teal with red to green and silver to green UCC flakes.
Shown here in 3 thin coats, plus top coat.
Shown here in 3 thin coats, plus top coat.
Formula was good and applied well.
Dries with some texture.
Top coat needed for a full, glossy finish.
Inspired by LSP. Described as a lavender crelly filled with gold crystal flakes.
Shown here in 3 thin coats, plus top coat.
Shown here in 3 thin coats, plus top coat.
Formula was good and applied well.
Dries with some texture.
Top coat needed for a full, glossy finish.
Inspired by Princess Bubblegum. Described as a thermal that is a bright hot pink when cold and a pale bubblegum pink when warm. Its kissed with a pink to blue shifting iridescent shimmer, holo microflakes, and a hint of rose metallic microflakes
Shown here in 2 coats, plus top coat.
Shown here in 2 coats, plus top coat.
Formula was good and applied well.
Dries with subtle texture.
Top coat needed for a full, glossy finish.
2. Cut out the desired image.(Try cutting as close as possible to the image)
3. Place in warm water for 5-10 seconds.
4. Using your thumb & index finger slide the paper backing from the image.
5. Lightly dampen the back of the decal.
6. Place image on your nail, pressing down to remove any air bubbles.
7. Seal it with a top coat.
Tip:
If you prefer to use the decal over a colored/darker polish it's best to paint the back of the image with white polish/acrylic paint letting it dry before applying it to the nail.
Instructions:
1. Scrape over the entire image going over it several times(use a credit card or something with a thin hard edge) This will help the vinyl stick to the transfer sheet.
2. Place the decal face down & slowly peel the white backing from the translucent transfer sheet.
3. Slowly remove transfer sheet, making sure all of the pieces of the vinyl are sticking to the transfer tape.
4. Clean the surface where you are applying your sticker.
5. Add your sticker to the surface, smooth down.
6. Take your scraper & scrape all over the image(use your fingers if scraping isn't an option)
7. Slowly & carefully remove the transfer sheet leaving your sticker decal in place.
Releases March 13th at noon EST
through March 20th at 11:59pm EST
A limited number of boxes ready to ship and once those are gone it will switch to preorder.
3 Polishes:
$30 plus shipping
Ribbits and Stickits:
waterslide decals $7
lsp Vinyl Sticker $5
lsp Vinyl Sticker $5
Jake & Finn Vinyl Sticker $5.50
Adventure Time Vinyl Sticker $5.50
CONVERSATION